The SATA interface mode of PCIE to SATA3.0 is AHCI mode. If you want to insert a system disk on our card, the premise is that your system disk must be installed in AHCI mode when installing the system on the motherboard, otherwise it will not pass Our card riser starts the system.
If it is determined that the system disk is inserted into the SATA interface on the motherboard and the installation system is in AHCI mode, then you can directly insert the hard disk into our card, and then enter the motherboard BIOS to set the system disk as the first boot.
The above two conditions are met. If it still fails to start, or restarts repeatedly, it may be because the hard disk interface of the motherboard conflicts with our adapter card. The solution is to enter the motherboard BIOS and set the hard disk interface option of the motherboard to Disabled, save and restart to start the system

Compliant with Serial ATA 3.0 specification, backward compatible with SATA2.0 SATA1.0
Compliant with PCI-Express v2.0 specification, backward compatible with PCI-Express v1.0.
Supports communication speeds of 6.0 Gbps, 3.0 Gbps and 1.5 Gbps
Supports Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i.
Support 4 SATA
Support AHCI1.0 mode and IDE mode
Support for Native Command Queuing (NCQ)
Supports FIS based port multiplier switch or command switch.
Hot-plug and hot-plug are supported.
Compatible with SATA6G, 3G and 1.5G hard drives
Bus interface: PCI-Express x1 slot
Expansion interface: 4 SATA3.0 interfaces
System Requirements: One available PCI Express X1 slot, supporting both PCI-E X2 X4 X8 X16
OS: Windows10/8/7 (32/64bit)/Vista (32/64bit)/XP/2003/2008/linux
colour: black
Material: PCB
Size: 15x7x6CM

Package Contents:
1 x SATA3.0 expansion card