CompA-Ct and comvenient, easy to use. This product will make your life easier and convenient.

Features:
1. Electrical parameter measurement function (voltage, current, A-Ctive power, Ener-gy, frequency, power fA-Ctor)
2. Overload alarm function (over power alarm threshold, bA-Cklight and power flashing to alarm)
3. Power alarm threshold preset function (can set power alarm threshold)
4. The Ener-gy can be reset use the key
5. Store data when power off
6. Large-screen LCD
7. BA-Cklight function
8. Key Function

BA-Cklight control
Short press the key to turn on or off the bA-Cklight, the bA-Cklight has memory function, it can store the on or off state when power off.

Reset Ener-gy
Step1: Long press the key for 5 seconds until the Ener-gy value flash, then release the key.
Step2: Short press the key again, then the Ener-gy value is cleared and exit the reset flashing state.
Step3: If there is no operation on the key within 5 seconds, it means the Ener-gy value is not cleared and will exit the reset state.

Set power alarm threshold
Step1: Long press the key until the LCD screen display “SET CLr”, then release the key to enter the setting state
Step2: Power window display the current power alarm value and the last digit begin to flash, then you can short press to plus 1, when there is no operating over 3 seconds, it will switch the digit position automatically, the setting method is as same as the above.
Step3: After finish the setting, long press the key over 5 seconds will store automatically and exit, the range of A-Ctive power threshold is 0.0~2.5kW. it can display six parameters at the same time.

Specifications:
Working voltage: 80 ~ 260VA-C
Test voltage: 80 ~ 260VA-C
Rated power: 100A/22000W
Operating frequency: 45-65Hz
Measurement A-CcurA-Cy: 1.0 grade
Size: 9*5*2.5cm
Wire length:19cm
Weight: Approx.110g

Display format:
1.Power
Test range: 0~22000W
Starting measure power: 0.2W
<10W display format: 1.00~9.99W
<100W display format: 10.0~99.9W
<1000W display format: 100~999W
<10000W display format: 1.00~9.90kW
≥10000W display format: 10.0~22.0kW
2.Ener-gy
Test range: 0~999kWh
<1kWh display format: 0~999Wh
<10kWh display format: 1.00~9.99kWh
≥10kWh display format: 10~999kWh
3.Voltage
Test range: 80~260V
Display format: 80~260V
4.Current
Test range: 0~100A
Starting measure current: 0.001A
<10A display format:0.000~9.000A
≥10A display format:10.00~99.99A
5.Frequency
Test range: 45~65Hz
Display format: 45~65Hz
6.Power fA-Ctor
Test range: 0~1PF
Display format: 0.00~1.00PF

Precautions:
1. This module is suitable for indoor, please do not use outdoor.
2. Applied load should not exceed the rated power.
3. Wiring order can’t be wrong.

PA-Ckage Included:
1*A-C Power Multimeter
1*100A Split Core Current Transformer