Pureit Marvella Slim 20 Ltr Ro+Uv+Mf Water Purifier Description
Pureit Marvella Slim RO+UV+MF has a 7-stage purification process which ensures you to get water that is ‘As Safe As Boiled Water’ and also removes excess Total Dissolved Solids (TDS) to make your water tastier.

• Stage 1st: Pre-Sediment Filter: Removes visible dirt and impurities.
• Stage 2nd: Membrane Protector: Removes chlorine, harmful pesticides, bad taste and odour-causing organic compounds, increasing the life of the RO membrane.
• Stage 3rd: Mini Filter: Filters water further to ensure removal of finer particulate impurities.
• Stage 4th: RO Membrane: Removes dissolved salts, hardness, pesticides and heavy metals like lead and mercury, microbial contaminants like bacteria, virus, protozoa and cysts.
• Stage 5th: UV Chamber: Additional stage of purification that destroys bacteria, virus and parasites.
• Stage 6th: Micro Filtration (MF) Membrane^: Additional stage of purification to further purify water.
• Stage 7th: Post RO Carbon Filter: Acts as a polisher and enhances the taste of purified water.

Pureit Marvella Slim 20 Ltr Ro+Uv+Mf Water Purifier

• 7.8 to 8.1 under running water conditions
• Under test condition Input TDS – 750 PPM, Turbidity < 1 NTU, Input pressure – 10 psi, Input Hardness – Upto 300 ppm, Temp. – Room temp.
• Assumption: 5 membered family needing 20 litres of water every day (4 litres per person per day).
• For all water contact parts.
• Permeate flow rate and recovery are based on standard test conditions and may vary depending on input water quality, TDS, pressure and life of Filter elements.
• Input water quality and TDS content are important determinants of output water quality.
• If input pressure exceeds 30 PSI, please install a company provided pressure reducing valve at an additional cost.
• If the pressure is less than 10 PSI then you need to buy ‘Pressure enhancing pump’ at an additional cost. Device should not be installed in a house where input pressure is greater than 60 PSI.
• Post-RO Carbon Filter fitted in the device may need to be changed intermittently at extra cost in case you face smell issues.
• Technical specifications are subject to change or improvement without prior notice.
• In case the TDS is >1000 PPM, a company provided anti-scalant is recommended to be installed This has to be purchased at extra cost.
• If the iron content in the input water is high, it is recommended to install a company provided iron removal filter at an additional cost.
• Physical product may vary from the image on the website