Features:
With multiple protections, input overvoltage protection, reverse connection protection, poor contact of the test clip detection prompt, safer to use.
Quickly and accurately detect the batt-ery status and prevent the car from breaking down midway.
It can be directly connected to the batt-ery of the car for testing, no need to remove the batt-ery, more convenient.
It can detect and display batt-ery capacity SOC and health status SOH, which are displayed as a percentage.
Through the low frequency signal injection test, there is no need to connect a large load discharge test, and it will not cause damage to the batt-ery.
The batt-ery voltage status and batt-ery discharge capacity can be detected, and the display can be switched by moving up/down buttons.
Wide application, it is suitable for car lead-acid starter batteries, including regular flooded, EFB, AGM tablet batt-ery, AGM winding batt-ery, GEL batt-ery,WET, etc.

Specifications:
Material: ABS
Applicable batt-ery Voltage: 12V/24V
Voltage Measure Range: 8-30V
Test Range: 3AH-200AH
Test result: SOH, SOC, CCA Value, IR, etc.
Test standards: CCA, SAE,DIN, IEC, EN, CA
Working Temperature: -40-60℃
Item Size: 150 * 90 * 35mm/ 5.9 * 3.5 * 1.4in
Item Weight: 325g/ 11.5oz
Package Size: 165 * 110 * 55mm/ 6.5 * 4.3 * 2.2in
Package Weight: 400g/ 14.1oz

Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color shown on the pictures.

Packing List:
1 * Car batt-ery Tester
1 * Manual