1. Double H bridge, can drive two DC motors at the same time, single 7A current, high power
2. Wide voltage input 65V~27;
3. Signal optocoupler isolation input, which can be directly controlled by Io port without interference;
4. Under-voltage protection to prevent instantaneous high current from burning the module;
5. High-power Tvs and electrostatic discharge circuit suppress transient interference pulse and static electricity, enhance EMC performance, product is stable and reliable, industrial-grade design.

Motors with rated voltage of 24V, suitable for rated power of 115W and below or rated current of 7A or below for long-term full-scale operation
A motor with a rated voltage of 12V, suitable for a motor with a rated power of 40W and below or a motor with a rated current of 7A or less for a long time at full capacity
The power supply voltage is 6.5V-27V. The power supply must not be reversed or exceed 27V, otherwise the module may be burned. It is recommended to connect a 15A fuse in series with the power input. Dual motor interfaces, each rated output current 7A, peak current 50A, the motor interface must not be short-circuited, it is recommended to connect a 10A fuse.
The control signal voltage is 3-6.5V, which are the enable signal and the forward and reverse control signals respectively. Enable signal terminal (ENA) input PWM adjustable speed, PWM frequency range 0-10KHZ, PWM minimum pulse width 10us. Working temperature -25℃-80℃.
size:55x55x16mm
Material:abs+metal
colour:Red

Package Contents:
1 * module