Supports 6-port 6.0Gbps SATA III interface
Output swing control and automatic impedance calibration for SATA III PHY
Supports asynchronous signal recovery
Supports spread spectrum clocking
Supports partial / slumber power saving mode

Automatically speed negotiation
Supports BIST and loopback mode
Supports staggered spin-up
Supports Hot-Plug
Supports asynchronous notification
Supports ATAPI drives
Supports command-based and FIS-based swit
Product name: SATA3.0 1 to 5 expansion card
Product Model: ADP6ST0-J05
Product master: JMICRON JMB575
Product interface: SATA 7PIN
Support system: WINXP, WIN7, WIN8, WIN10
Wiring method: plug in the SATA power supply, and plug the input SATA cable into the motherboard or expansion card.
Precautions:
1. This expansion card must support the PM (SATA PORT MULTIPLIER) function on the motherboard or the expansion card to recognize 5 hard drives. General motherboard SATA does not support this function. If not supported, only one card can be recognized.
2. Use the SATA or DC2.5 power supply to supply power to the expansion card
color:As shown
Material:PCB

Package Contents:
1 x Expansion Card
1 x SATA Cable
1 x USB Cable