1. Cut off the power or shut down the computer.
2. Find the POWER SW on the computer motherboard, remember the location and pull it out. Install a dupont wire into the unplugged position.
3. The other end of the DuPont line is connected to the PSW pin of the product. The unplugged POWRE SW connector is connected to the product PW-KEY pin. (The length of the connecting cable is not enough, you can use the DuPont cable we donated to extend).
4. Find the POWERLED on the computer motherboard, remember the location and pull it out. Install a Dupont wire into the unplugged position
5. The other end of the DuPont cable is connected to the PLED1 and PLED2 pins above the product. The POWERLED connector pulled out on the motherboard is connected to the PLED1 and PLED2 pins below the other one of the product.
size:53x26mm
Material:pvc
colour:Black
Package Contents:
1 x XY-WPCL
2 x link line